Communicating touch screen control panel for Sanyo indoor units
Overview
ThermoPad-S is a new touch screen control panel for controlling Sanyo indoor units. It's "flat with the wall" design is fully compatible with different Bticino and Gewiss 3 modules plastic covers makes it very convenient and flexible for any interior design. The built in temperature sensor and the ability to interlock I/O's enable ThermoPad-S to control not only the air conditioning, but also external (additional) heating in the same zone. As an example, along with the air conditioning, ThermoPad-S can control an additional Heating with Auxiliary Electrical Heaters (or underfloor heating) using "Auxiliary Heating" mode.
Features
6 Selectable Operation Modes
Six operation modes (Cool, Heat, Fan, Dry, Auto, Auxiliary Heat) are available and can be individually enabled or disabled to meet specific HVAC system application requirements.
Timer Functions
ThermoPad-S supports Weekly and Sleep Timers. Weekly Timer allows to program the unit for up to 50 operations based on a weekly schedule. The Sleep Timer allows turning the unit on/off, once, after defined time period.
Controlling Additional Heating Applications
When using "Auxiliary Heat" mode ThermoPad-S can be used for controlling additional heating, such as heating with electrical heaters or underfloor heating, using its on board programmable Digital/Analog PWM outputs.
Smart Back Light
ThermoPad-S is equipped with backlight. It is being lit for a few seconds on every touch. The backlight is available in a number colors on demand. (Green, Blue and others)
Communication
ThermoPad is fully Compatible with Sanyo A B communication line. As an option, it can also be controlled over RS485 network using standard ModBus RTU protocol or propitiatory ASCII interface.
Applications
- Controlling and monitoring of the Sanyo indoor units.
- Combined control of the indoor unit and additional auxiliary heating (electrical heaters or underfloor heating).
- Interlocking different systems with air conditioning control (such as: lighting, motion sensors, door openings, etc.).
Specification
Connections
ThermoPad wiring table for Sanyo
Compatibility
ThermoPad-S is connected directly to the A B terminals on Sanyo indoor units. No additional power supply is required.
Documents
Documents
Operation instructions
Reference Manual (Preliminary)
Product Brochure
Support
FAQ
No FAQ Currently available
Downloads
Firmware
Descargar Firmware for ThermoPad for Toshiba v.0.2.8
Utilidades
Telnet programs:
Download PuTTY telnet client for Windows 7 PuTTY is a small telnet program that can provide an easy access to the device from PC/Laptop by RS232/USB connection.
