Communicating touch screen control panel for Toshiba indoor units
ThermoPad-T is a new touch screen control panel for controlling Toshiba indoor units. IIt's "flat with the wall" design is fully compatible with different Bticino and Gewiss modules plastic covers makes it very convenient and flexible for any interior design. The built in temperature sensor and the ability to interlock I/O's enable Thermopad-T to control not only the air conditioning, but also external (additional) heating in the same zone. As an example, along with the air conditioning, Thermopad-T can control an additional Heating with Auxiliary Electrical Heaters (or underfloor heating) using "Auxiliary Heat" mode.
6 Selectable Operation Modes
Six operation modes (Cool, Heat, Fan, Dry, Auto, Auxiliary Heat) are available and can be individually enabled or disabled to meet specific HVAC system application requirements.
ThermoPad-T supports Weekly and Sleep Timers. Weekly Timer allows to program the unit for up to 50 operations based on a weekly schedule. The Sleep Timer allows turning the unit on/off, once, after defined time period.
Controlling Additional Heating Applications
When using "Auxiliary Heat" mode ThermoPad-T can be used for controlling additional heating, such as heating with electrical heaters or underfloor heating, using its on board programmable Digital/Analog PWM outputs.
Smart Back Light
ThermoPad-T is equipped with backlight. It is being lit for a few seconds on every touch. The backlight is available in a number colors on demand. (Green, Blue and others)
ThermoPad-T is fully Compatible with Toshiba A B communication line. As an option, it can also be controlled over RS485 network using standard ModBus RTU protocol or propitiatory ASCII interface.
- Controlling and monitoring of the Toshiba indoor units.
- Combined control of the indoor unit and additional auxiliary heating (electrical heaters or underfloor heating).
- Interlocking different systems with air conditioning control (such as: lighting, motion sensor, door openings, etc.).
ThermoPad-T is connected directly to the A B terminals on Toshiba indoor units. No additional power supply is required.
No FAQ Currently available
Download firmware for ThermoPad, Release Date: 2012-03